The best way to Paint Split Pane Windows

Neatly painted window trim assists your house puts its best face to the community. Painting a split- window, some times called a split- window, could be a chore because there are so many tiny, individual surfaces to paint. While the divisions are called mullions the wood divisions operating horizontally with this type of window are called stiles. Although several windowpanes is tiresome, you’ll be glad all this planning was done by you when you have small or no paint to clear in the glass and remove the tape.

Run warm water and include some general purpose cleanser.

Wet a rag in the cleaning solution and wipe all components of the window clear. Pay specific attention to the surfaces since they are going to be the dusty of the stiles that face upward.

Allow the window to dry totally.

Apply blue painter’s tape to the glass in the edges of all surfaces to be painted. Butt the tape up straight to mullions and the stiles.

Open a can of latex enamel paint and stir it properly using a paint stick. Pour a few of the paint.

Paint mullions and each of the stiles with the angled sash paint brush. Starting on top of the window, paint the stiles. Next paint the correct sides of the mullions with this row, followed closely by by the aspect of the mullions, finishing with all the stile on such row.

Painting in this this manner, operating the window one row at a time down. Following the same routine in every row of windowpanes to make sure that you don’t skip any sections.

The paint can to decide how long you have to wait before implementing a 2nd coat, if essential.

When the paint is entirely dry remove the tape.

Scrape a razorblade on the other side of the glass to eliminate any specks of paint on the windowpanes.

Spray glass cleaner on the glass and wipe using a clear dry fabric. Avoid spraying glass cleaner on the color.

See related