How to Hide Ugly Structures in Your Back Yard

When it’s a hideous metal discard or a chicken coop that could use some love, an ugly exterior construction may be challenging hurdle to overcome when you want to create an aesthetically pleasing space. When ripping down that ugly structure isn’t an option, you could attempt to hide it by building a trellis and planting fast-growing vines around it.

Decide on the quantity of sunlight the area gets. In case you have a few sides of this structure to cover, the quantity of sunlight might vary from side to side. Observe the area for a couple of days and make notes about how much sunlight the numerous sides receive. Of course, the sun’s pattern will change from season to date, but you’re going to find a general idea by a couple of days of observation.

Choose vines according to the amount of sunlight your area gets. Fast-growing vines include clematis, wisteria, honeysuckle or the common trumpet creeper — but speak to your local extension service or a local nursery to determine the vines that grow best in your area and also match your sunlight requirements. Also ask about possibilities for plants or shrubs that are evergreen and will not die off during the colder months. An alternative is to grow berry bushes like raspberry or blackberry, since they grow very tall and spread fast. When you pick a vine, determine whether the vine needs trellising or whether it will grow up exterior walls without a trellis.

Till around the structure, creating a few feet of new, turned-up dirt around the outside walls of this structure. Remove any grass or other debris.

Add compost or other soil amendments, such as lime or wood ash, according to the demands of the vine you’re going to plant. Work the amendments into the soil with a shovel or hoe. If your selected vines do not require a trellis, you are able to plant vines or seeds directly into the dirt at this moment.

Dig holes to the outside edges of your planting area, about half as deep as the height of this structure, to build a trellis. For example, if your structure is 8 feet high, you’ll want to dig 4-foot holes in which to set 12-foot trellis support poles that will likewise be 8 feet high above ground.

Screw eye hooks into your support poles, about every 12 to 18 inches, on the region of the rod that will be above ground.

Set the poles into the holes, with the eye holes facing the opposite pole. Have someone hold the rod in place because you pour concrete into the hole. Use a level to be sure the rod is right as the concrete dries. If needed, nail support beams to the sides of the poles as the concrete dries. Repeat the procedure for the rod on the other side of this structure.

Wrap support cable from the very best eye hook on one aspect of this structure to the eye hook on the other side of this structure. Repeat this step for each group of eye hooks.

Plant vines or seeds in the ground, under the trellis wires, according to the spacing and thickness requirements for the type of vine you have chosen. Water the seeds or uncontested after planting.

Fertilize and water the vines as they grow, to encourage rapid development. As the vines get bigger, train them to grab onto the trellis wires.

See related