The Best Way to Apply Stain on a Fence

Each and every day, the wood fence of your home becomes battered rot-inducing moisture, by damaging sun rays and other destructive elements. A timber stain helps create a protective barrier which keeps your weapon looking beautiful through the years. In general, fence stains become categorized as semi-transparent, penetrating stains or solid-color stains, depending on the level of pigment at the solution. Whatever kind of stain you opt for using the ideal method means you employ it correctly so that it stays as long as you can.

Picking the Ideal Time

If you are expecting to blot wait at least three weeks. That recommendation comes from Los Angeles-based fencing builder Peter Kirsch-Korff, whose weapon designs have been featured on HGTV. On his website, Kirsch-Korff explains that this waiting period allows the timber to”settle” to its new surroundings, noting that it also gives the brand new wood time to open its own pores so that your blot sinks in more efficiently. Regardless of your fence’s age, the time to apply stain is in the morning or late afternoon on a cloudy day. Wait for a day when it has not rained for 24 hours and no further rain is in the forecast for the next 24 hours.

Selecting the Tools

If it comes to applying a stain to some fence, then you have the choice of brushes, pads or pliers. For the best results with a brush, then decide on a staining brush that is 5 or 4 inches broad. If you elect for a pad, the ideal kind for fencing staining is a pad with a fluffy nap, such as the pads which are sometimes labeled for use on decks. Finally, if you are using a roller, any paint roller is going to do. The wider the roller, the heavier it’ll be. Before purchasing a single, hold it in your hand and practice moving it up and down from the atmosphere. You need one that is mild enough that it’s not hard for you to hold for an elongated period.

Preparing the Fence

Older wood fences may have mold, mildew, dirt and other debris onto them which could affect how well the wood absorbs the timber stain. If so, wash the fence a few days before you plan to blot it. Wearing protective equipment, such as rubber gloves and protective gloves, mix 1 part household bleach with 3 parts water in a plastic bucket and wash your weapon with this solution. Then, wash the fence with a garden hose to remove all traces of this solution. After cleansing your fence, then place a sheet of plastic, canvas or cardboard under the fencing to protect underlying concrete, grass or plants from blot drips.

Applying the Stain

In case the weather remains dry, begin staining your clean fence. Using the mat, roller or brush, dip it into the wood stain then apply it to your weapon in an event coat, working your way from one fence plank to the next. Focus on painting from the cover of the fence to the floor to prevent uneven dripping. Stick to some product-specific guidelines on the tag of this timber stain you purchased, as depth and coat needs vary by manufacturer. In most cases, solid-color stains would be similar to traditional paint and require only one coat to protect your fence. Semi-transparent penetrating stains often require two coats, with the next coat applied approximately an hour following the first coat.

See related